Exceeds ANSI standards, heated 1500L immersion emergency tank shower provides tepid water for over 15 minutes at a guaranteed flow of 76 litres per minute, no mains water supply needed.
SKU : OCS0090 - 15 minutes at a guaranteed flow of 76 litres per minute
Category : Spill Response - Site Safety
Features
- Integral immersion heater, controlled by a dual thermostat, maintains the water in the tank at a constant temperature.
- Low pressure shower rose delivers large quantities of water in an even pattern that is non-injurous to the user.
- Thermal insulation assists in maintaining the water temperature in the tank to international standards in all climates.
- Instant activation by panic bar or optional foot panel.
- Optional eye/face wash can be mounted internally or externally.
- Optional chiller unit for hot climates.
- Electrical supply: 230V Single Phase, 50/60Hz (110V optional).
- Location: Indoor, Outdoor
- Climate: Hot (risk of over-heating), Cold (risk of freezing), Variable
- Installation: Free Standing / Floor Mounted
- Features: Eye/Face Wash
- Framework: Stainless Steel
- Capacity (Litres): 1500
Specifications
SKU |
OCS0090 |
Weight |
340 kg |
Dimensions |
1420 × 1495 × 3746 mm |
Inlet Connection Size & Type |
3/4” BSP Female
|
Shower Operation |
Panic bar (optional foot panel control)
|
Eye/face Wash Operation |
Lift lid up (optional foot treadle control)
|
Supply Pressure |
0.5 to 10 BAR G (7 to 145 PSI)
|
Flow at Operating Pressure |
Shower – 76 litres/minute Eye/Face wash – 12 litres/minute
|
Electrical Equipment - Non-hazardous |
Suitable for use in areas classified as non-hazardous
|
Electrical Equipment - Hazardous |
ATEX Zone 1 & 2. Gas groups IIA & IIB. Temp Class T3 (IIC available)
|
Materials of Construction |
Shower Rose: GRP stainless steel Piping & Valve Materials: uPVC and stainless steel Control Valve – Shower: uPVC 11/2” BSP ball valve Control Valve – Eye/face Wash: 1/2” 316L stainless steel full flow ball valve with stainless steel ball Eye/face Wash Strainer: 1/2” stainless steel Overflow: 1” BSP uPVC Ballcock Valve: 2 x 1/2” BSP brass Water Tank: 1500 litre (396 US Gallons) capacity heavy density polyethylene HDPE Tank Surround and Lid: Heavy-duty GRP in white (green or yellow available) Shower Frame and Legs: Stainless steel. Polished brush finish (paint options available) Pull Rods for Valve Activation: Stainless steel Foot Control Options: Panel foot control – Stainless steel/Treadle foot control – powder coated stainless steel All Fasteners and Fixings: Stainless steel
|
Minimum Ambient Operating Temperature |
16º C (60º F) (For 0º C (32º F)
|
Maximum Ambient Operating Temperature |
40º C (104º F) (+55º C (131º F) with cooling unit fitted)
|